Equipment

This was my first 6s drone build. All parts for this drone were hand picked with long range, freestyle, and power in mind. I absolutely love flying this quad. With Emax 2306 1700kv motors and a Mamba 50a ESC/FC board, this freestyle quad can really whip around. The Caddx ratel makes for some great image quality even in low light and the Rush Tank VTX outputs up to 800mw of clean video transmission. With 800mw VTX output paired with the FrSky r9m/r9mm combo this quad can fly incredible distances.

On board I have a GoPro Hero 6 Black with an ND16 filter and Ethix GoPro Facehugger protecting it from the elements.

Parts List:

Frame: https://bit.ly/2TwDTCW

Mamba 50a FC/ESC: https://bit.ly/2IcAtAm

Emax Eco Motors: https://bit.ly/3clKxVt

Rush Tank VTX: https://bit.ly/3anl77R

Caddx Ratel: https://bit.ly/3cgWr2V

FrSky r9mm Reciever: https://bit.ly/2PE0Tz7

GPS: https://bit.ly/2VyhiqU

Lumeniere Antenna: https://bit.ly/2wWsFQE

HQ Props: https://bit.ly/2VwCr4z

URUAV 6s 1500mah Battery: https://bit.ly/3aOi5dk

Landing Gear: https://bit.ly/2or4cyP

This drone WHIPS. Similar to the Viper 6S, this drone utilizes the same Mamba F722s stack and has very similar on board equipment. The XILO Stealth 1700kv Motors on this quad really scream. Camera has been upgraded from a Foxeer to a Caddx Ratel. Video transmitter is an FXT Ares VTX. 

On board I have a GoPro Hero 6 Black with an ND16 filter, this was mounted on using a standard GoPro adhesive mount.

Parts List:

Frame: 

Mamba 50a FC/ESC: https://bit.ly/2IcAtAm

Emax Eco Motors: 

VTX: 

Caddx Ratel: https://bit.ly/3cgWr2V

FrSky r9mm Reciever: https://bit.ly/2PE0Tz7

GPS: https://bit.ly/2VyhiqU

Lumeniere Antenna: https://bit.ly/2wWsFQE

HQ Props: https://bit.ly/2VwCr4z

Tatuu 1050mah Battery: 

Landing Gear: 

Another Custom built drone. In this build I was looking for a drone that could I could use for slower, cinematic shots in tight spaces. Built on the Shendrone Squirt V2 frame, this drone is rocking a 50a Diatone Mamba F722s with iFlight 1800kv motors and Gemfan 3" Props. To ensure I can see everything when flying this cinewhoop, I went with a Foxeer Razer Micro and an AKK FX3 VTX set at 600mw. This quad has the R9 long range receiver on board.

On board I have a GoPro Hero 6 Black with an ND16 filter, along with a custom printed TPU variable angle mount.

Equipment List: 

Frame: https://bit.ly/2zACIMQ 

FC/ESC: https://bit.ly/2IcAtAm 

Motors: https://bit.ly/3bm60fa 

VTX: https://bit.ly/3fKrLJ9 

Camera: https://bit.ly/3cSC0YV 

Reciever: https://bit.ly/2PE0Tz7 

Antenna: https://bit.ly/2wWsFQE 

Propellers: https://bit.ly/2Z4aXqi

Battery: https://bit.ly/3dLZuAp

Variable GoPro Hero 5/6/7 mount: https://bit.ly/2YkLC9H